Parts

Good, used lifter guide tappet from an International Maxxforce DT 466 engine. The lifter guide tappet has been visually inspected and is in good condition. There is no visible damage to the lifter guide tappet. There is no corrosion on the lifter guide tappet. The casting number is not visible. The engine serial number is 466HM2U3074202. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rear cover plate from a Cummins 6BT 5.9 engine. The rear cover plate has been visually inspected and is in good working condition. There is no visible damage on the rear cover. The bolt holes are in good working condition. There is some corrosion around the rear cover. The plastic seal is in good working condition. The casting number is 3936895. The engine serial number is 4907663. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!.

Good, used fuel filter housing from a Volvo D13H engine. The fuel filter housing has been visually inspected and is in good working condition. There is no visible damage seen on the fuel filter housing. The casting number is F00741-01. The engine serial number is D13*957718*H1*H. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crankcase breather from a Paccar MX-13 EPA 17 engine. The crankcase breather has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the crankcase breather. There is minor corrosion on the crankcase, please refer to photos. The casting number is A060A489. The engine serial number is Y214446. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used water supply housing from an International DT466 engine. The water supply housing has been visually inspected and is in good working condition. There is no visible damage to the water supply housing. There is minor rust seen on the water supply housing. The casting number is 1855722C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used flywheel adapter from an International Maxxforce DT 466 engine. The flywheel adapter has been visually inspected and is in good working condition. There is no visible damage to the flywheel adapter. There is rust seen on the flywheel adapter. The casting number is unavailable. The engine serial number is 466HM2U3082538 . Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil pick up tube from a Cummins ISX engine. The oil pick up tube has been visually inspected and is in good working condition. The oil pick up tube has no visible damage. There is minor corrosion around the tube, please refer to photos. The fittings are in good working condition. The bolt holes are clean and clear from obstruction. The casting number is 4026621. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used water transfer tube from a Paccar MX-13 engine. The water transfer tube has been visually inspected and is in good working condition. There is minor corrosion seen on the tube.The water transfer tube has no visible damage. The casting number is 1885506.The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, Used Air Intake Heater from a Volvo VED12 engine. The Air Intake Heater has been visually inspected and is in good working condition. all bolt holes are free from obstruction. The Air Intake Heater has minor corrosion. The Air Intake Heater Casting Number is 20713451. The Engine Serial Number is D12D*95120072. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil cooler from a Cummins ISL 300 engine. The oil cooler has been inspected and is in good working condition. There is no visible damage seen on the oil cooler. The bolt holes are clear . There is minor rust seen on the oil cooler. The casting number is 3974324. The engine serial number is 73554957. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover spacer from a Cummins ISB220 engine. The valve cover spacer has been visually inspected and is in good condition with no damage. The bolt holes are in good condition with no visual damage.The casting number is 3975943.The engine serial number is 46832031. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used hydraulic pump from an International VT365 engine. The hydraulic pump has been visually inspected and is in good working condition. There is no visible damage on the pump. The pump's gear spins freely and is in good working condition. The bolt holes are clean and clear from obstruction. The fittings are clear form obstruction and are in good working condition. There is rust and corrosion around the pump, please check the pictures provided. The casting number is 3606194C91. The engine serial number is 6VNXHO365AEC. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used timing gear from a international DT466 engine. The timing gear has been visually inspected and is in good working condition. There is no visible damage to the timing gear. The gear teeth are in good condition. There is minor rust on the timing gear. The timing gear spins freely. The casting number is 1824636C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil filter base from an International DT466. The oil filter base has been visually inspected and is in good working condition. There is no visible damage to the oil filter base. There is minor corrosion seen on the base. The bolt holes are clear and in good condition. The casting number is 1841989C1. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used high pressure oil rail from an International DT466 engine. The high pressure oil rail has been visually inspected and is in good working condition. There is minor damage seen on the high pressure oil rail. The bolt holes are clear and in good condition. The casting number is 1832477C3. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used mass air flow sensor from a 2003 GM/Chev (HD) 6.6L Duramax engine. The mass air flow sensor has been inspected and is in good condition and ready to be installed. There is no visible damage to the mass air flow sensor.There is no rust on the mass air flow sensor. The mass air flow sensor is in good condition and ready to be installed. The casting number for the mass air flow sensor is 8 97209 5450 and the engine serial number is unknown. The wiring on the mass air flow sensor is in good condition. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good, used engine idler gear from a Paccar MX13-EPA13 engine. The engine idler gear has been inspected and is in good working condition. There is no visible damage seen on the engine idler gear. There is no rust or corrosion seen on the engine idler gear. The casting number is 1837778. The engine serial number is Y078966. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Fuel Injector Hold Down Clamps from a Cummins N14 engine. The clamps do not have any dents or cracks in them. The clamps have been inspected and are in good working condition. Bolt holes are clear and undamaged. No chips or damage done to the clamps. The casting number is 3064393. The engine serial number is 11934591. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used thrust plate from a Volvo VE D12 engine. The thrust plate has been inspected and appears to be in good working condition. There is no visible damage seen on the thrust plate. The casting number is 8170220. The engine serial number is D12*604649*D2*AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used thermostat housing from a Caterpillar C7 engine. The thermostat housing has been inspected and appears to be in good working condition. There is no visible damage to the thermostat housing. There is minor rust seen on the thermostat housing. The casting number is 133-3730. The engine serial number is KAL48145. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine pulley from a Volvo VE D12 engine. The engine pulley has been inspected and appears to be in good working condition. There is no visible damage seen on the engine pulley. The casting number is 286. The engine serial number is D12*604649*D2*AH. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rocker Arm from a Cummins N14 engine. The rocker arm has been inspected and is in good working condition. There is no visible damage seen on the rocker arm. There is no rust on the rocker arm. Bolt holes are clear and in good condition. The casting number is 3066300. The engine serial number is 11334591. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Fuel Filter Base from a Caterpillar C7 engine. The fuel filter base has been inspected and appears to be in good working condition. There is no visible damage to the fuel filter base. There is minor corrosion seen on the fuel filter base. The casting number is 163-8702. The engine serial number is KAL67321. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used air transfer elbow from a Cummins 6BT 5.9 engine. The air transfer elbow has been visually inspected and has no visible damage. the air transfer elbow has minor corrosion. The fittings are in good working condition. The v-band clamps are in good working conditions. The casting number is 3918685-02-5. The serial number is 4907663. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel filter Assy bracket from an International Maxxforce 13 engine. The fuel filter Assy bracket has been visually inspected and is in good working condition. The fuel filter Assy bracket has minor corrosion. All bolt holes are clean and clear from obstructions. There is not visible damage on the fuel filter Assy bracket. The fuel filter Assy bracket casting number is 3007562C1. The engine serial number is 125HM2Y4166760. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!