Parts

Good, used Allison HD4560P transmission. The transmission has been visually inspected and is in good working condition. There is not visible damages. There is a minor corrosion on the transmission. The TCM is not attached. The oil check tube is attached and is in good working condition. The transmission mount are attached and in good working condition. The casting number is 29541333. The serial number is 6610075661. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used driver side fuel tank from a 2005 Mack MR688S truck. The fuel tank has been visually inspected and is in good working condition. The fuel tank has minor rust and corrosion. The fuel tank has straps attached with mounting brackets. The fuel cap is missing. The fuel tank is middle fill. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good, used engine pulley from a Mack E7 engine. The pulley has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The pulley has some rust around it, please refer to photos. There is no visible damage on the pulley. The casting number is not available. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used connecting rod with piston from a Mack E7 engine. The rod and piston have been visually inspected and are in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the rod or piston. There is minor rust and corrosion around the rod and piston, please refer to photos. The casting number is F5454267M. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used auxiliary drive shaft from a Mack E7 engine. The auxiliary drive shaft has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is minor rust on the drive shaft, please refer to photos. The casting number is 453GC430M. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used water manifold from a Mack E7 engine. The water manifold has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The connects are in good working condition. There is minor rust on the manifold. There is no visible damage on the manifold. The fittings are in good working condition. There is some corrosion around the manifold, please refer to photos. The casting number is 107GC552A. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crank case breather from a Mack E7 engine. The crank case breather has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The crank case breather corrosion around it, please refer to photos. The fittings are in good working condition. The casting number is 191GC433. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel pump from a Mack E7 engine. The fuel pump has been visually inspected and is in good working condition. The pumps gear spins freely and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the pump. The fittings are in good working condition. The casting number is 2 445 110 500. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil pump from a Mack E7 engine. The oil pump has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no damage on the oil pump. There is minor rust on the pump, please refer to photos. The pump gear spins freely and is in good working condition. The casting number is 315GC472M. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover from a Mack E7 engine. The valve cover has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the valve cover. There is no rust on the valve cover. There is paint chipping and corrosion around the cover. The casting number is 337GB545. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used thermostat housing from a Mack E7 engine. The thermostat housing has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The thermostat has corrosion around it, please refer to photos. The fittings are in good working condition. There is no visible damage on thermostat housing. The casting number is 107GC550AM. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used air compressor from a Mack E7 engine. The air compressor has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is rust on the air compressor. The fittings are in good working condition. There is corrosion on the air compressor, please refer to photos. The casting number is T-5002852-0. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used exhaust manifold from a Mack E7 engine. The exhaust manifold has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. The fittings are in good working condition. There is rust on the manifold. There is corrosion on the exhaust manifold, please refer to photos. The casting number is 104GC5183M. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used harmonic balancer from a Mack E7 engine. The harmonic balancer has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the balancer. There is rust on balancer The fitting is in good working condition. There is some corrosion around the balancer, please refer to photos. The casting number is 404GB499A. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fly wheel from a Mack E7 engine. The flywheel has been visually inspected and is in good working condition. The bolt holes are clean and clear obstruction. There is rust around the flywheel. There is no damage around the flywheel. The fittings are in good working condition. The casting number is not available. The engine serial number is 1MKXH11.9V60. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rocker arm assembly from a Mack E7 engine. The rocker arm assembly has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the rocker arm assembly. There is no rust on the rocker arm shaft or rocker arms. The casting number is 146GB335 . The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used rocker arm assembly from a Mac E7 engine. The rocker arm assembly has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is no visible damage on the rocker arm assembly. There is some rust on the rocker arms, please refer to photos. The casting number is not available. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used driver side steel battery box with an aluminum lid from a 1998 Mack MR688S truck. The battery box has been inspected and is in good condition. The battery box has minor rust seen on it. The latch has no visible damage. There is minor damage seen on the box, refer to photos. The casting number is not visible. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good, used Steel BENDIX Air Dryer from a 2001 Mack MR688S truck. The part number is 7819958. The engine serial number is N/A. The aluminum air dryer has been inspected and is in good condition. The air dryer has 3 valve lines that are in good condition with no damage. The air dryer has a steel bracket that is connected to it. The steel bracket does have some rust on it. The air dryer does not have any dents, cracks or leaks anywhere. See photos and give us a call if you have any further questions. We can ship Anywhere! Thank you.

Good used condition bumper from a 2001 Mack MR688S truck. This bumper appears in good condition. There is minor rust seen on the bumper. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used condition bumper from a 2001 Mack MR688S truck. This bumper appears in good condition. There is minor rust seen on the bumper. See photos and give us a call if you have any questions. We can ship Anywhere! Thank you.

Good used, Mack, E7-300. Water Separator Manifold. Casting Number on part is (107GC550AM). Please see pictures. Please call or email with any questions.

Good Used, Mack, E7-300. Breather Housing. Casting number on part is (191GC433). Please see pictures. Please call or email with any questions.

Good Used, Mack, E7-300, Rocker Arm Assembly. Casting Number on part is (146GB335). Please see pictures. Please call or email with any questions.

Good Used, Mack, E7-300. Coolant Elbow Piece. Please see pictures. Please call or email with any questions.