Parts

Good used Chevrolet hood C70 small minor crack on the right front side of the hood, left back side of the hood is also a little tore.Front right upper side of the grill is broken. This is a fiberglass tilt hood. Please see pictures if you have any questions call or message. Thank you!!

Good, used flywheel from a 2007 GM Duramax 6.6L engine. The flywheel has been inspected and is in good working condition. There is no visible damage seen on the flywheel. Flywheel teeth are in good condition. There is minor rust seen on the flywheel. Bolt holes are clear and in good condition. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Hood from a 2001 Chevrolet B7000 truck. The Hood has been visually inspected and is in good condition. The Hood has clear headlights in good condition. The Hood has chipped paint, please refer to photos. The approximately measurements from cowl to grille is 42 inches. The hinges are in good condition. The interior is in good condition. The Grille has chipped paint but is in good condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good running GM/Chev 6.6L V8 engine. Good runner with 178,941 miles. There is a J-Pro Diagnostic report available upon request. The engine serial number is 12628594. Please see photos and video If you have any questions feel free to give us a call or send us a email. Removed from vehicle and ready to ship. We ship anywhere! No blow by runs very good

Good running GM/Chev 6.6L V8 engine. Good runner with 119,977 miles. There is a J-Pro Diagnostic report available upon request. The engine serial number is 12628594. Please see photos and video If you have any questions feel free to give us a call or send us a email. Removed from vehicle and ready to ship. We ship anywhere! No blow by runs very good .

Good, used flywheel from a Gm 6.6L engine. The flywheel has been visually inspected and is in good working condition. There is no visible damage on the flywheel. The bolt holes are clean and clear from damage. The flywheel's teeth are free from damage and in good working condition. There is rust and corrosion on the flywheel, please check the pictures provided. The casting number is 7160 DH 080128. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good running 2011 6.6L Duramax (LGH) engine. Professionally maintained. 182,709 miles. Diagnostic report available upon request. Please see photos and video. No blow by runs very good If you have any questions feel free to email us or give us a call. Thanks! WE SHIP ALL OVER !!

Good, used 2005 Chevrolet C6500 cab wired for a Caterpillar L6 7.2L engine. The truck originally had a manual transmission. The cab has been visually inspected and is in good condition. There is minor damage seen on the driver side door of the cab. Both doors open and close with no problems. There are few areas of paint chipping seen around the cab. The driver side seat is damaged. The dash is missing a few panels but is in good condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used camshaft from a GM 6.6L engine. The camshaft has been visually inspected and is in good working condition. The camshaft has no visible damage. There is no visible rust or corrosion. The gear and gear teeth are in good working condition. The casting number is 8980774530. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used camshaft from a GM 6.6L Duramax engine. The camshaft has been visually inspected and is in good working condition. The camshaft has no visible damage. There is no visible rust or corrosion. The gear and gear teeth are in good working condition. The casting number is 8980774530. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Cylinder Head from a GM/Chev (HD) 6.6L DURAMAX engine. The Cylinder Head has been visually inspected and is in good condition. The Head has corrosion. The Valves are in good condition. The casting number is 8GF1. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Cylinder Head from an GM/Chev (HD) 6.6L DURAMAX engine. The Cylinder Head has been visually inspected and is in good condition. The head has corrosion. The Valves are in good condition. The casting number is 8GF1. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Block from a GM/Chev (HD) 6.6L DURAMAX engine. The block has been visually inspected and is in good condition. The block has rust and corrosion, please refer to the photos provided. The sleeves are in good condition. The block has no dents or cracks. The casting number is 97377917. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crankshaft from a GM/Chev (HD) 6.6L engine. The crankshaft has been visually inspected and is in good working condition. The crankshaft has no visible damage. The bolt holes are clean and clear from obstruction. There is no visible rust or corrosion on the crankshaft. The casting number is not visible. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used exhaust manifold from a GM 6.6l engine. The exhaust manifold has been visually inspected and is in good working condition. The exhaust manifold has no visible damage. There is rust and corrosion around the manifold, please check the pictures provided. The fittings are in good working condition and free from damage. There is a small bolt piece stuck in one of the bolt holes. The casting number is 897224586. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used EGR cooler from a GM 6.6L engine. The EGR cooler has been visually inspected and is in good working condition. The EGR cooler has no visible damage. The bolt holes are clean and clear from obstruction. The contacts attached are clear from damage and in good working condition. There is rust and corrosion around the EFGR cooler, please check the pictures provided. The fittings are in good working condition and free from damage. The casting number is 8980343543. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used intake manifold from a GM 6.6L engine. The intake manifold has been visually inspected and is in good working condition. There is no visible damage on the manifold. The bolt holes are clean and clear from obstruction. The fittings are clear from damage. There is corrosion on the manifold, please check the pictures provided. The casting number is 8973635720. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used oil cooler from a GM 6.6L engine. The oil cooler has been visually inspected and is in good working condition. The oil cooler has no visible damage. The fittings are clear from obstruction and in good working condition. There is corrosion around the oil cooler, please check the pictures provided. The casting number is unavailable. The serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used EGR tube from a GM 6.6L engine. The EGR tube has been visually inspected and is in good working condition. There are a few dents on the tube, please check the pictures provided. The bolt holes are clean and clear from obstruction. The fittings are in good working condition and free from damage. There is rust and corrosion on the tube, please refer to photos. The casting number is unavailable. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used belt tensioner from a GM 6.6L engine. The belt tensioner has been visually inspected and is in good working condition. There is no visible damage on the belt tensioner. The tensioner's pulley spins freely and is in good working condition. There is rust and corrosion around the belt tensioner, please check the pictures provided. The casting number is 97329062. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good, used harmonic balancer from a GM 6.6L engine. The harmonic balancer has been visually inspected and is in good working condition. There is no visible damage on the balancer. The fitting is in good working condition and free from damage. The balancer's thread has a small Knick on it, please check the pictures provided. There is rust and corrosion around the balancer. The casting number is SPN019298.The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!

Good used ECM from a GM/CHEV (HD) 6.6 L DURAMAX engine. The ECM has been visually inspected and is in good condition. The ECM has no visible damage. The connectors are in good condition The casting number is 12628641. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used ECM from a GM/Chev (HD) 6.6L DURAMAX engine. The ECM has been visually inspected and is in good condition. The ECM has no visible damage. The connector are still connected. The casting number is 12628641. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good running GM/Chev 6.6L V8 engine. Good runner with 173,038 miles. There is a J-Pro Diagnostic report available upon request. The engine serial number is not available. Please see photos and video If you have any questions feel free to give us a call or send us a email. Removed from vehicle and ready to ship. We ship anywhere! No blow by runs very good

Good, used rocker arm housing with valve cover from a GM 6.6l engine. The rocker arm housing has been visually inspected and is in good working condition. The bolt holes are clean and clear from obstruction. There is corrosion around the rocker arm housing, please check the pictures provided. The valve cover is in good working condition and has no visible damage. The valve cover's bolt holes are clean and clear form obstruction. The casting number is unavailable. The engine serial number is unavailable. Please see the photos attached. If you have any further questions, feel free to call or email us. We ship anywhere! Thank you!!