Parts

Good used air intake elbow from a 2003 GM/Chev (HD) 6.6L Duramax engine. The air intake elbow has been inspected and is in good condition and ready to be installed. The air intake elbow has no visible damage. The air intake elbow has no rust on it. The casting number for the air intake elbow is 15035614 and the engine serial number is unknown. The air intake elbow is in good condition and ready to be installed. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good used right side exhaust manifold for a 2003 GM/Chev (HD) 6.6L engine. The right side exhaust manifold has been inspected and is in good condition. There is slight damage to the right side exhaust manifold. There is rust on the right side exhaust manifold. The casting number for the right side exhaust manifold is 0972228361 and the serial number for the right side exhaust manifold is unknown. The holes on the right side exhaust manifold are in good condition. Please see the attached photos and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good used fan hub and assembly from a 2003 GM/Chev HD 6.6L Duramax engine. There is no visible damage to the fan hub and assembly. There is little rust on the fan hub and assembly. The fan hub and assembly has been inspected and is in good condition and is ready to be installed. The bolt turns without any problems. The casting number on the fan hub and assembly is 404240120 and the engine serial number is unknown. Please see the photos attached and if you have any further questions please feel free to contact us either by telephone or by e-mail. We ship anywhere! Thank-you!

Good, used ALUMINUM SIDE MIRROR MOUNT from a 2003 GMC C5500 truck. The casting numbers are 714175 REV 4A1 >AL< LH. This aluminum drivers side mirror mount has been inspected and it appears to be in good used working condition. Please take a look at all the attached photos. Feel free to call or email us with any questions or concerns. WE SHIP ANYWHERE AROUND THE WORLD!!! Thank you

Good, used ALUMINUM SIDE MIRROR MOUNT from a 2003 GMC C5500 truck. The casting numbers are 714176 REV 4A1 >AL< RH. This aluminum passenger side mirror mount has been inspected and it appears to be in good used working condition. Please take a look at all the attached photos. Feel free to call or email us with any questions or concerns. WE SHIP ANYWHERE AROUND THE WORLD!!! Thank you

Good used plastic inner wheel well from a 2003 GMC C5500 truck. The casting numbers are #01593, >E/P< and #15176772. This inner wheel well has been inspected and appears to be in good used condition. Please see attached photos. Call or email us with any questions. WE SHIP ANYWHERE!!!

Good used, GMC, Driver side, Fender Extension with flap. Has cracked off a little at the top. Measures: 24".Long. Without flap. and 16".Wide. Please see pictures. Please call or email with any questions.

Used driver side door off of a 1999 GMC C7500. In fair condition. The paint is chipping away as shown above. Theres also a substantial amount of rust on the top and at the base also. The window is manual but is jammed up. Please see pictures. For further information feel free to call or email us. We ship anywhere!!! Thank you.

Good used Passenger door from a 2005 GMC C6500 cab & chassis truck. Van type door, not a heavy truck. Manual window works well. No Mirrors on this door, as they were mounted to the cab of the truck. See photos and feel free to call or email with any questions.We Ship Anywhere!! Thank you for looking.

Good used crankshaft from a good running Caterpillar C7 Acert engine. All bearing surfaces are clean with no evidence of overheating and the end gear is good with no damage to teeth. Casting number is 2223900. See photos and feel free to call or email us with any questions. We can ship Anywhere!! Thank you for looking.

Good, used flywheel from a GM/Chevy HD 6.5L engine. The flywheel has been inspected and seems to be in good working condition. There is no visible damage to the flywheel. There is minor rust on the flywheel. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used SM (Synchro Mesh) 465 transmission removed from a 1975 GMC grain truck powered by a larger, gasoline fueled V-8 engine. Transmission shifts fully through the gate. There is a PTO on the passenger side of this transmission and a cover plate on the driver's side. The switch near the shift knob is for the PTO. See photos and feel free to call or email us with any questions. We can ship Anywhere! Thank you for looking.

Used hood from 1992 GMC C7000Topkick. Measures approximately 39 from Cowl to edge of grille. Has damage on Driver's side corner. Please see all pictures for damage as shown. The hood has minor scratches refer to photos. The headlights are in good working condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Hood from 1992 GMC C7000 TOPKICK truck. The Hood has been visually inspected and is in good working condition. The Hood has corrosion and chipped paint please refer to photos. The headlights are clear and in good condition. The interior of the hood is in good condition. The measurements from cowl to grille are approximately 42 inches. The hood latches are in good condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Used fender off a 1995 GMC C7000 TOPKICK. Measures 22 inches from top to mudflap. Please see pictures, call or email for more information. WE SHIP ANYWHERE!! Thank you.

Lower section, fender extension from driver's side of a 1986 GMC C 7000. Bolts included for the upper section. Slight damage at hood contact point.

Good used Aluminum Flywheel housing from a Detroit 6V92 engine. The flywheel housing has been visually inspected and is in good condition. The flywheel housing has rust and corrosion. The flywheel housing has some bolts attached, please refer to the photos provided, all other bolt holes are clean and clear from obstructions. The flywheel housing has some damages, refer to photos. The Casting number is 5104497. The Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used 1992 GMC C6000 Topkick cab wired for a GM/Chev (HD) 6.0L engine. The truck originally had an automatic transmission. The cab has been visually inspected and is in good condition. There is no major damage seen on the cab. Both doors open and close with no problems. There are multiple areas of paint chipping seen around the cab. The seats are in good condition. The dashboard does not have any major visible damage. The interior of the cab is in good condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used 1999 GMC C6500 cab wired for a Caterpillar 3126 engine. The truck originally had a manual transmission. The cab has been visually inspected and is in good condition. There is no major damage seen on the cab. Both doors open and close with no problems. There are multiple areas of paint chipping seen around the cab. Both seats are in good condition. The dash is in good condition. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Gear assembly from a Detroit 6V92 engine. The gear assembly has been visually inspected and is in good condition. The Gear assembly teeth are in good condition. The Gear assembly has rust and corrosion, please refer to the photos provided. All bolt holes are clean and clear from obstructions. The casting number is 5122985. The Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used valve cover with breather from a Detroit 6V92 engine. The valve cover with breather have been visually inspected and are in good condition. The Valve cover and breather have rust and corrosion. The valve cover and breather have some damages, please refer to the photos provided. The valve cover and breather have minor chipped paint. The Casting number is 5103690ND. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Supercharger blower +water pump + blower cover +plate adaptor+ governor drive+ fuel gear pump from a Detroit 6V92 engine. The Supercharger blower +water pump + blower cover +plate adaptor+ governor drive+ fuel gear pump has been visually inspected and are in good condition. The Supercharger blower +water pump + blower cover +plate adaptor+ governor drive+ fuel gear pump has rust and corrosion, please refer to the photos provided. The Supercharger blower +water pump + blower cover +plate adaptor+ governor drive+ fuel gear pump has no signs of visable damage. All bolt holes are clean and clear from obstructions. The Casting number is 5102883, 5133295-M, 5101411, 90900T9. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Gear from a Detroit 6V92 engine. The gear has been visually inspected and is in good condition. The gear has minor rust, please refer to the photos provided. The Gear has corrosion. The Gear teeth are in good condition and have no visible damage. The gear has some damages, please refer to the photos provided. The gear has an attachment, refer to photos. The Casting number is 5147286. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used steel pulley from a Detroit 6V92 engine. The pulley has been visually inspected and is in good condition. The pulley has rust and corrosion, please refer to the photos provided. The pulley has no signs of visible damage. All bolt holes are clean and clear from obstructions. The Casting number is 96906L. The Serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good used Steel pulley from a Detroit 6V92 engine. The pulley has been visually inspected and is in good condition. The pulley has rust and corrosion, please refer to the photos provided. The pulley has minor chipped paint. All bolt holes are clean and clear from obstructions. The Casting number is 796466. The serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!