Parts

Good running Maxxforce DT 466 Twin Turbo engine from a 2013 International PB105 bus. Engine has 130,099 miles and runs strong. A recent JPRO report is available upon request and it will show just one fault at this time. (Mass Air Flow ((MAF)) Sensor Calibration Failed) Engine serial number is 466HM2Y3422427. See photos and video and give us a call if you have any questions. We can ship Anywhere! Thank you.

Used LOW PRESSURE OIL PUMP off of a 99' International DT466 motor. Part is in good condition. Casting # is (1890235C1). Please see pictures and call or email us with any questions.

Good, used radiator from a International DT466 engine. The radiator has been visually inspected and is in good working condition. The radiator has the cooler attached. The radiator was tested at 10 PSI and held pressure. The radiator has minor visible damage to the radiator shroud, refer to photos. The over flow reservoir is attached and has no visible damage. The fittings on the radiator are in good working condition. The casting number is 5575D009. The engine serial number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used Radiator off a 2012 International MAXXFORCE 7 engine. This radiator does have a charge air cooler. The plastic fill tank is in good condition with no leaks or cracks. The radiator has been visually inspected and appears to be in good working condition. The bolt holes are smooth with no damage. The screen on the inside is in good condition with no visual damage. There is no visible damage seen on the radiator. The radiator has been tested at 10lbs pressure and is in good working condition. The casting number is not visible. Please see the photos attached. If you have any further questions, please feel free to call or email us. We can ship anywhere! Thank you!

Good used Oil Filter Housing off a 2009 International Maxxforce 7 casting number (#1872857C95). Please see pictures, call or email for more information. We ship anywhere. Thank you.

Good, used fuel filter assembly from a International Maxxforce DT466 engine. The fuel filter has been visually inspected and is in good working condition. There is no visible damage to the fuel filter assembly. There is minor corrosion to the fuel filter assembly. The contacts are in good working condition on the fuel filter assembly. The fittings are in good condition. The casting number is 7094107C91. The engine serial number is 466HM2Y3507256. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fan hub with bracket from a International Maxxforce DT466 engine. The fan hub has been visually inspected and is in good working condition. The fan hub spins freely. All bolt holes on the fan hub are clean and clear of obstruction. The fan hub has minor rust. The casting number is 1858145C1. The engine serial number is 466HM2Y3507256. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used cylinder head from an International DT466 engine. The cylinder head has been visually inspected and seems to be in good working condition. There is no visible damage seen on the cylinder head. There is no damage seen on the valves. There is minor rust seen on the cylinder head. The casting number is not visible. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil pan spacer from an International Maxxforce 7 engine. The oil pan spacer has been inspected and appears to be in good working condition. There is no visible damage to the oil pan spacer. The bolt holes are clear and in good condition. The casting number is 1856174C1. The engine serial number is not available. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fuel pressure regulator from an International DT466 engine. The fuel pressure regulator has been inspected and appears to be in good working condition. There is no visible damage to the fuel pressure regulator. There is minor corrosion seen on the fuel pressure regulator. The casting number is 3006082C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used back pressure valve from an International DT466 engine. The back pressure valve has been inspected and appears to be in good working condition. There is no visible damage to the back pressure valve. The wiring is in good condition. The casting number is 7088657C91. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used turbo connection tube from an International DT466 engine. The turbo connection tube has been inspected and appears to be in good working condition. There is no visible damage to the turbo connection tube. There is minor corrosion seen on the turbo connection tube.. The casting number is 677561. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine mount from an International DT466 engine. The engine mount has been inspected and appears to be in good working condition. There is minor damage visible to the engine mount. There is rust seen on the engine mount. The casting number is 3532953C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used thermostat housing from an International DT466 engine. The thermostat housing has been inspected and appears to be in good working condition. There is no visible damage to the thermostat housing. There is rust seen on the thermostat housing. The casting number is 7078090C2. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used fan clutch from an International DT466 engine. The fan clutch has been inspected and appears to be in good working condition. There is no visible damage to the fan clutch. There is rust seen on the fan clutch. The casting number is 1858145C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used belt tensioner from an International DT466 engine. The belt tensioner has been inspected and appears to be in good working condition. There is no visible damage to the belt tensioner. There is rust seen on the belt tensioner. The belt tensioner spins freely. The bolt hole is clear and in good condition. The belt tensioner pulley is in good condition. There is minor corrosion seen on the belt tensioner. The casting number is 1873217C2. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine pulley from an International DT466 engine. The engine pulley has been inspected and appears to be in good working condition. There is no visible damage to the engine pulley. There is minor rust seen on the engine pulley. The casting number is 1850785C2. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used idler gear from an International DT446 engine. The idler gear has been inspected and appears to be in good working condition. There is no visible damage to the idler gear. There is minor rust seen on the idler gear. The idler gear teeth have wear, however are in good condition. There are minor scratches seen on the idler gear. The idler gear spins freely. There is minor corrosion seen on the idler gear. The casting number is 1824636C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used idler gear from an International DT446 engine. The idler gear has been inspected and appears to be in good working condition. There is no visible damage to the idler gear. There is minor rust seen on the idler gear. The idler gear teeth have wear, however are in good condition. There are minor scratches seen on the idler gear. The idler gear spins freely. The casting number is 1824635C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used engine mount from an International DT466 engine. The engine mount has been inspected and appears to be in good working condition. There is no visible damage to the engine mount. There is rust seen on the engine mount. The casting number is not visible. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used valve cover from an International DT466 engine. The valve cover has been inspected and seems to be in good working condition. There is no visible damage to the valve cover. The bolt holes are clear and in good condition. The casting number is 7078025C2. the engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used crankcase breather from an International DT466 engine. The crankcase breather has been inspected and seems to be in good working condition. There is no visible damage to the crankcase breather. The bolt holes are clear and in good condition. The casting number is 1889632C91. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used exhaust manifold from an International DT466 engine. The exhaust manifold has been inspected and appears to be in good working condition. There is no visible damage to the exhaust manifold. The casting number is 1883380C4. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used oil pickup tube from an International DT466 engine. The oil pickup tube has been inspected and appears to be in good working condition. There is no visible damage to the oil pickup tube. there is minor rust seen on the oil pickup tube. The casting number is 1840124C1. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!

Good, used timing cover from an International DT466 engine. The timing cover has been inspected and appears to be in good working condition. There is no visible damage to the timing cover. The bolt holes and threads are clear and in good condition. There is minor corrosion seen on the timing cover. There are no visible cracks on the timing cover. The casting number is 1879185. The engine serial number is 466HM2U3301768. Please see the photos attached. If you have any further questions, please feel free to call or email us. We ship anywhere! Thank you!